Technical data sheet Request for documentation Rate request
At the end of 2016, the Italian manufacturer Ribitaly - producer of BWA rigid semis - launched its range of BMA rigid hulls. Composed of 4 models, the range ranges from the simple and versatile open hull for the day to the recent 8m10 sundeck, launched in October 2020.
These models have a modern design and are suitable for a wide range of water activities, from towed sports to fishing, family outings and relaxing.
BMA X199 - 5.90 m
The smallest model, the BMA X199 The range has a simple and uncluttered design, just like its fittings. The large forward area offered by the shape of the deck livet can easily be transformed into a sunbathing area. It also offers a large storage area via the locker hidden under the cushions.
With a 150 HP outboard motor, the boat reaches a top speed of 37 knots with 2 people on board.
BMA X222 - 6,99 m
Like the X199, the BMA X222 has a modern design, a simple and sleek deck layout and a pronounced V-shaped hull. Versatile, this model can be used for lazing around, fishing or water sports.
Access to the cockpit is facilitated by the possibility of lifting the rear seat. On board, there is plenty of storage space, and the pilot's seat can be tilted to create a large square corner.
There are two versions of the front panel. A Touring version with a U-shaped bench seat that can be converted into a sunbathing area or a Sun version with a fixed sunbathing area.
The BMA X222 is powered by a 100 to 230 HP outboard motor with a recommended power rating of 175 HP.
BMA X266 - 8.05 m
The BMA X266 follows the line of the smallest models in the range, but unlike the first two open hulls, this model has a cabin in the central steering console. This large storage volume can also be converted into a cabin with a wash basin, toilet and shower.
Three versions are available to meet the different programs sought after by boaters:
The touring version with equipment dedicated to family cruising and relaxation (sunbathing, front cockpit table, galley block, fixed rear bench seat...)
The basic version for a simple and stripped down boat that will suit sport fishing enthusiasts
The sun&Fish version which offers a complete equipment for a boat that adapts to various nautical activities.
On this model, the tilting bench seat has been replaced by two bolster seats, and the rear saloon is equipped with three folding seats with a large table that folds out according to the number of guests. Finally, an icebox takes place behind the cockpit seats, but it is also possible to choose a leaning-post with an integrated galley.
Motorized outboard - single or twin-engine from 150 to 350 HP - the open hull can reach the maximum speed of 48 knots.
BMA X277 - 8.10 m
Although this new model does not gain much in length compared to the previous model, it allows you to envisage cruising thanks to a beautifully sized cabin. The design of the hull makes it possible to exploit the full length and width of the boat to offer generous space. Thus, the BMA X277 has a saloon convertible into a double berth as well as a rear cabin with two berths and a separate bathroom with sink, shower and marine toilet.
At the bow, the large sundeck offers a generous sundeck, while the L-shaped cockpit with galley allows you to prepare meals in a convivial atmosphere.
The BMA X277 is offered in outboard engines, from 200 to 400 HP (single or twin-engine).
