Pegasus, a transparent, zero-emission 3D printed superyacht

Joseph Forakis, head of the design firm of the same name, has just unveiled a superyacht concept that breaks with current codes. Pegasus, with its 88 m length, will be 3D printed, designed to limit the visual and ecological impact. It could be ready for production in 2030.

A zero-emission superyacht project

After his CLX96 yacht concept, awarded at FLIBS 2022, Joseph Forakis is back on the scene with his new Pegasus concept. It is an 88-meter long superyacht, designed to be almost invisible. The designer explains: "This is a zero-emission yacht, invisible in both its design and its environmental impact."

To create this new concept, the firm relied on existing and developing technologies for durability, autonomy and structural integrity. A mesh will be 3D printed to create the hull and superstructure in one piece. According to the designer, "will result in a strong, lightweight structure produced using less energy, materials, waste, space and time than conventional construction."

Le superyacht Pegasus et ses parois réfléchissantes
The superyacht Pegasus and its reflective walls

A 3D printed skeleton structure

According to the first visuals, Pegasus' hull will be low and linear, with a straight bow and a silver finish to reflect the water and blend with the liquid element. Similarly, the superstructure and its three levels of decks will be fitted with reflective glass "wings" of sorts, adorned with reflections of sky and clouds. The interior mesh structure will allow light to seep through to all levels while offering a breathtaking view of the exterior. The frame of the structure, printed in 3D, becomes visible through the reflective glass under certain angles and lighting conditions.

Un squelette en impression 3D
A 3D printed skeleton

A "tree of life" on four bridges

Inside, the multi-level "Tree of Life" is the masterpiece of futuristic design. The core of the hydroponic garden, its base emerges from a reflecting pool on the lower deck and is surrounded by the meditative Zen garden. The tree stretches across the four levels of Pegasus, accompanied by a spiral staircase, which should be sculptural. This garden should provide fresh food and purify the air on board.

La base de l'arbre de vie
The basis of the tree of life
L'arbre de vie, zone centrale de l'intérieur du superyacht
The tree of life, central area of the superyacht's interior

A hybrid solar electric-hydrogen yacht

In addition to the futuristic and minimalist design, the designer opted for a hybrid solar electric-hydrogen propulsion for a zero emission navigation. The glass of the superstructure will incorporate transparent solar panels to power electrolyzers extracting hydrogen from seawater. Fuel cells will convert the hydrogen into electricity, stored in Li-on batteries, to power the pods and all onboard and operating systems.

A la nuit tombée, le squelette en impression 3D se dévoile
At nightfall, the 3D printed skeleton is revealed

Nature and openness to the outside world

The minimalist design will combine nature and greenery on the inside with unobstructed views on the outside. The upper deck will be dedicated exclusively to the owner, with a forward-facing master suite with a large private deck. The large foredeck features a pool with transparent walls, which will be visible through tilting openings in the hull, transforming into a balcony. When closed, the pool will serve as a helipad.

Une belle plage avant avec piscine
A beautiful front beach with pool
Cabine propriétaire avec vue mer
Owner's cabin with sea view
Une belle terrasse privative pour le propriétaire
A beautiful private terrace for the owner

At the back, the beach club, with its huge spa and tilting bulwarks, is transformed into a solarium closed by sliding glass panels on the ceiling and along the rear bulkhead.

Une plage arrière cloisonnée par des baies vitrées
A back deck partitioned by bay windows
More articles on the theme