A new Riva 76 Coupe combining performance, comfort and sportiness

This new Riva unit is already under construction at the Ferretti Group's factory in La Spezia, Italy, and will be previewed in Monte Carlo and at the Cannes Yachting Festival in early September.

The Riva 76' Coupé has been designed with the brand's DNA in mind: sportiness and elegance, and is in line with the brand's sporty models. As explained by the CEO of Ferretti Group, Mr. Alberto Galassi, this yacht "collects the heritage of the past combined with state-of-the-art technology and will be a new Riva masterpiece."

The Riva 76' Coupe has an overall length of 22.98 m and a width of 5.75 m. The glass surfaces have a total area of 40m2: large hull glass on both sides, side glass on the main deck and on the handrail and a large windscreen for optimal visibility. Its large glass surfaces provide a space comparable to that of large yachts. A large flybridge allows you to relax on the sunbathing area, but also to pilot the boat. Barriers between inside and outside are minimized to allow owners to "living with the sea."

The stern of the boat has been designed to ensure the utmost comfort and user-friendliness. The transom can be almost submerged to transform into an underwater relaxation area or to facilitate your descent into the sea. In submerged mode, the launching of the tender (up to 3.5 m long) is made easier, as well as its storage in the garage. The access to the rear of the boat by the crossbar is done by two embedded side stairs, in natural teak. From the dock, access to the boat is to starboard, by an electric hydraulic gangway. The aft deck is equipped with a large aft bench seat that can be transformed into a large sun deck. There is also a dining area, plenty of storage space, a staircase to the flybridge on the left and access to the crew quarters below.

A sliding glass door ensures the continuity between the interior and exterior and allows you to enter an open space where you will find all the modern equipment and comforts worthy of a yacht: a TV that rises and falls electrically, audio and video equipment, a dining room for 8 people with an L-shaped sofa, a glass table and 4 chairs. On the starboard side, there is the living room with a sofa, armchairs and a coffee table. On the bow, there is the cockpit with two seats for the pilot and co-pilot.

The "night" area is over 11.5 m long, most of which has been reserved for the owner, who has a "full width" suite. The Riva 76' Coupé has 3 cabins. The owner's cabin has a bed facing the entrance, but also a relaxation area with a sofa on the port side, while on the starboard side there is a wardrobe and a desk/dressing table, all along the window. On the left, before the relaxation area, there is a dressing room. Another room houses the toilet and the bathroom consists of a double sink and a shower.

The galley is located on the right side down the stairs from the main deck. It is closed by a sliding door and equipped with appliances, worktop, cooktop and sink, arranged in an L-shape. Forward, a storage room houses a washing machine, and on request, a dryer. The starboard access is reserved for guests with a 2 single bed cabin and a VIP cabin.

The front of the boat houses a large lounge with a sofa on the deckhouse, and a large sunbathing area on the bow. The whole can be sheltered by a bimini. There are also two large storage areas.

The Riva 764 Coupe comes with 2 MAN V12, 1550 MHP V-Drives, which give it a top speed of 33 knots and a cruising speed of 29 knots. The owner can also choose more powerful engines like 2 MAN V12, 1800 MHP for a maximum speed of 37 knots and a cruising speed of 32 knots.

Technical specifications

Overall length 22,98 m
Length at waterline 19,07 m
Width 5,75 m
Draft 1,90 m
Empty travel 45,800 kg
Busy travel 53,500 kg
Gasoline 5,600 kg
Water 840 L
No one on board 16
Engine MAN V 12 1800
Maximum speed 37 knots
Cruising speed 32 nodes
Cabins 3
Crew cabin 1
Bathroom 3
Crew bathroom 3
More articles on the theme